Most roof problems are invisible from the ground. Cracked pipe boots, corroded chimney flashing, lifted ridge cap shingles, and blocked soffit vents cause leaks that homeowners don't see until water stains appear on the ceiling. Platte Roofing & Maintenance catches these issues early with a thorough roof inspection in Platte.
We inspect the roof in three stages. First, we walk the entire surface — checking shingles for wear, flashing for gaps, and all penetrations for seal integrity. Second, we examine the perimeter — drip edge, eave condition, gutter attachment, fascia and soffit condition. Third, we go into the attic — checking ventilation, insulation, and looking for moisture, mold, or daylight showing through the roof deck.
Our Roof Inspection Process
Schedule Your Inspection
Call (877) 586-1316 or book online. We schedule same-week roof inspections throughout Platte. Tell us if it's routine maintenance, real estate, insurance, or storm-related — each type gets a tailored inspection protocol.
Exterior Roof Walk
Full exterior roof walk. We check every square foot of shingles, every flashing transition, every penetration seal. Pipe boots squeezed for brittleness. Chimney flashing probed for gaps. Valley channels checked for debris buildup and wear. Photos taken of every finding.
Attic & Ventilation Check
We enter the attic to check from below. Soffit vent airflow verified. Ridge vent continuity checked. Insulation levels measured. Roof deck inspected for moisture stains, mold, daylight, or sagging between rafters. This catches problems the surface walk can't see.
Findings Delivered
Detailed inspection report with photos keyed to a roof diagram. Every finding documented with location, severity, and recommended action. Repair cost ranges included so you can budget accurately. Insurance-ready format available.
What Platte Customers Say
"After getting several quotes, these guys stood out with their honesty and knowledge. No pressure, just straightforward advice and excellent workmanship."
"From the first phone call to the final walkthrough, everything was seamless. The team was courteous and efficient. Already recommended them to two friends."
"Our neighbors recommended them and now we understand why. Meticulous attention to detail and they treated our home like it was their own."
Why Choose Platte Roofing & Maintenance for Roof Inspection?
Full Roofline + Attic
We inspect above and below — roof surface, flashing, perimeter, gutters, AND attic ventilation, insulation, and moisture. Most inspectors skip the attic. We don't.
Prioritized Findings
Critical, moderate, and low-priority categories. You know what needs fixing now, what can wait, and what to budget for. Clear cost ranges included for each recommended repair.
21+ Years Inspecting Platte Roofs
We know how SD weather affects roofing materials. We know what to look for in this climate. That experience shows in the thoroughness and accuracy of our reports.
Insurance-Ready Reports
Our storm damage inspection reports include date of loss, affected areas, damage indicators, and scope of repair in the format insurance adjusters accept.